A
-
Abdollahipour, Abolfazl
Investigation of the effect of in situ stresses and porosity on crack propagation mechanism in hydraulic fracturing by displacement discontinuity method [Volume 5, Issue 1, 2022, Pages 17-28]
-
Abdollahipour, Abolfazl
3D Numerical modeling of the effect of in-situ stress ratio on mud weight window in the drilling of the Zagros sedimentary basin [Volume 5, Issue 3, 2022, Pages 26-42]
-
Abdollahpour, Pouya
Finite element analysis to investigate the success probability of stress cage technology relative to regime of in-situ stresses for control of drilling fluid lost circulation [Volume 5, Issue 4, 2022, Pages 82-90]
-
Aghakhani Emamqeysi, Mohammad Reza
Sensitivity analysis on geomechanical properties of the formation affecting the wellbore stability during underbalanced drilling in one of the southwest fields of Iran [Volume 5, Issue 2, 2022, Pages 70-79]
-
Aghakhani Emamqeysi, Mohammad Reza
3D Numerical modeling of the effect of in-situ stress ratio on mud weight window in the drilling of the Zagros sedimentary basin [Volume 5, Issue 3, 2022, Pages 26-42]
-
Ameri Shahrabi, Mohammad Javad
Assesment of self-killing as a blowout control method in deep water wells [Volume 5, Issue 2, 2022, Pages 17-33]
-
Amini, Mohammad saeed
numerical and analytical study of reservoir geomechanics model for underbalanced drilling in sandstone formations [Volume 5, Issue 2, 2022, Pages 34-47]
-
Asef, Mohammad Reza
Introducing an optimized procedure for estimation of porosity, using a combination well log data [Volume 5, Issue 1, 2022, Pages 82-91]
B
-
Babaei, Saeed
Evaluation of absolute adsorption isotherm in shale gas reservoirs [Volume 5, Issue 1, 2022, Pages 1-16]
-
Bazyar, Mohammad Javad
Introducing an optimized procedure for estimation of porosity, using a combination well log data [Volume 5, Issue 1, 2022, Pages 82-91]
E
-
Ebrahimabadi, Arash
Geomechanical design of Shadegan oilfield in order to modeling and designing ERD wells in Bangestan formations [Volume 5, Issue 1, 2022, Pages 29-45]
-
Ebrahimabadi, Arash
A Model to Predict the Drilling Rate of Penetration in Shadegan Oil Field Using Artificial Neural Network [Volume 5, Issue 2, 2022, Pages 1-16]
-
Enayati Najafabadi, Mohammad
Geomechanical modeling to identify wellbore integrity issues [Volume 5, Issue 2, 2022, Pages 48-55]
-
Esfandiari, Morteza
Numerical study of the effect of reservoir permeability and fluid leak-off factor on the Hydraulic fracture characteristics in oil reservoirs and comparison with KGD and PKN analytical models [Volume 5, Issue 1, 2022, Pages 60-81]
-
Ezati, Mohsen
Geomechanical modelling and cap-rock integrity of one of the southwest Iranian giant carbonate oil field [Volume 5, Issue 3, 2022, Pages 43-60]
F
-
Fahimifar, Ahmad
Geomechanical modeling to identify wellbore integrity issues [Volume 5, Issue 2, 2022, Pages 48-55]
-
Fatehi Marji, Mohammad
Investigation of the effect of in situ stresses and porosity on crack propagation mechanism in hydraulic fracturing by displacement discontinuity method [Volume 5, Issue 1, 2022, Pages 17-28]
-
Fatehi Marji, Mohammad
3D Numerical modeling of the effect of in-situ stress ratio on mud weight window in the drilling of the Zagros sedimentary basin [Volume 5, Issue 3, 2022, Pages 26-42]
G
-
Ghalibaf Mohammad Abadi, Hamid
Estimation of Geomechanical Parameters, In Situ Stress Measurement Techniques, and Determination of Safe Mud Weight Windows Using Machine Learning Algorithm Methods [Volume 5, Issue 4, 2022, Pages 1-28]
-
Ghasemzadeh, Hasan
Evaluation of absolute adsorption isotherm in shale gas reservoirs [Volume 5, Issue 1, 2022, Pages 1-16]
-
Ghasemzadeh, Hasan
Numerical Investigation of oil recovery due to nanofluid injection into the oil reservoirs [Volume 5, Issue 3, 2022, Pages 61-73]
-
Ghasemzadeh, Hasan
Propagation of inhomogeneous waves in unsaturated visco-poroelastic layered media [Volume 5, Issue 3, 2022, Pages 1-25]
-
Gholami, Raoof
Estimation of Geomechanical Parameters, In Situ Stress Measurement Techniques, and Determination of Safe Mud Weight Windows Using Machine Learning Algorithm Methods [Volume 5, Issue 4, 2022, Pages 1-28]
-
Gholamniya, Reza
Ranking and Analysis of the Interaction among Factors Influencing Well Control Barriers in the Drilling Operation using the Hybrid Multi Criteria Decision Making Model with DANP Approach [Volume 5, Issue 1, 2022, Pages 46-59]
-
Ghoreishian, Ali
Treatment of relative permeability term in two-phase flow problems in porous media [Volume 5, Issue 3, 2022, Pages 84-91]
H
-
Hadiloo, Saeed
Quantitative seismic facies analysis by the cross-correlation coding and matching with depositional facies;
(A case study of the Poseidon region of Australia ( [Volume 5, Issue 4, 2022, Pages 54-67]
-
Hafezi Moghaddas, HAMID
Estimation of Geomechanical Parameters, In Situ Stress Measurement Techniques, and Determination of Safe Mud Weight Windows Using Machine Learning Algorithm Methods [Volume 5, Issue 4, 2022, Pages 1-28]
-
Hashemizadeh, Abbas
3D Numerical modeling of the effect of in-situ stress ratio on mud weight window in the drilling of the Zagros sedimentary basin [Volume 5, Issue 3, 2022, Pages 26-42]
-
Heydari, Mohsen
Investigation of the effect of in situ stresses and porosity on crack propagation mechanism in hydraulic fracturing by displacement discontinuity method [Volume 5, Issue 1, 2022, Pages 17-28]
-
Heydari, Mohsen
Sensitivity analysis on geomechanical properties of the formation affecting the wellbore stability during underbalanced drilling in one of the southwest fields of Iran [Volume 5, Issue 2, 2022, Pages 70-79]
I
-
Iranmanesh, Mohammad Ali
Investigating the effects of conductive-convective heat transfer on hydraulic fracturing via a fully coupled THM analysis using an enriched EFG method [Volume 5, Issue 3, 2022, Pages 74-83]
J
-
Javadi, Morteza
Evaluation of Critical Reynolds Number for Non-linear Crude Oil Flow through Rough-walled Fractures [Volume 5, Issue 4, 2022, Pages 29-40]
L
-
Lashkaripour, Gholam Reza
Estimation of Geomechanical Parameters, In Situ Stress Measurement Techniques, and Determination of Safe Mud Weight Windows Using Machine Learning Algorithm Methods [Volume 5, Issue 4, 2022, Pages 1-28]
M
-
Mirderikvand, Hossein
Ranking and Analysis of the Interaction among Factors Influencing Well Control Barriers in the Drilling Operation using the Hybrid Multi Criteria Decision Making Model with DANP Approach [Volume 5, Issue 1, 2022, Pages 46-59]
-
Mirzaeian, Yousef
Investigation of the effect of in situ stresses and porosity on crack propagation mechanism in hydraulic fracturing by displacement discontinuity method [Volume 5, Issue 1, 2022, Pages 17-28]
-
Mirzanejad, Majid
Propagation of inhomogeneous waves in unsaturated visco-poroelastic layered media [Volume 5, Issue 3, 2022, Pages 1-25]
-
Misaghi, Ali
Introducing an optimized procedure for estimation of porosity, using a combination well log data [Volume 5, Issue 1, 2022, Pages 82-91]
-
Moghadasi, Jamshid
Geomechanical modelling and cap-rock integrity of one of the southwest Iranian giant carbonate oil field [Volume 5, Issue 3, 2022, Pages 43-60]
-
Moradi Ghiasabadi, Behnaz
Ranking and Analysis of the Interaction among Factors Influencing Well Control Barriers in the Drilling Operation using the Hybrid Multi Criteria Decision Making Model with DANP Approach [Volume 5, Issue 1, 2022, Pages 46-59]
-
Mortazavi, Ali
numerical and analytical study of reservoir geomechanics model for underbalanced drilling in sandstone formations [Volume 5, Issue 2, 2022, Pages 34-47]
N
-
Nabi-Bidhendi, Majid
Evaluation of hydrocarbon generation potential of source rocks in North Dezful region by determining the richness of organic matter using well surveying logs [Volume 5, Issue 2, 2022, Pages 56-69]
-
Nakhaee, Ali
Ranking and Analysis of the Interaction among Factors Influencing Well Control Barriers in the Drilling Operation using the Hybrid Multi Criteria Decision Making Model with DANP Approach [Volume 5, Issue 1, 2022, Pages 46-59]
-
Nazarisaram, Mahdi
Geomechanical design of Shadegan oilfield in order to modeling and designing ERD wells in Bangestan formations [Volume 5, Issue 1, 2022, Pages 29-45]
-
Nikoosokhan, Saeid
numerical and analytical study of reservoir geomechanics model for underbalanced drilling in sandstone formations [Volume 5, Issue 2, 2022, Pages 34-47]
-
Nikoosokhan, Saeid
Geomechanical modeling to identify wellbore integrity issues [Volume 5, Issue 2, 2022, Pages 48-55]
-
Nikouii, Saman
Numerical Investigation of oil recovery due to nanofluid injection into the oil reservoirs [Volume 5, Issue 3, 2022, Pages 61-73]
-
Norouzi, Peyman
The effect of loading condition and the nmber of shaped charges on the perforation performane. [Volume 5, Issue 4, 2022, Pages 68-81]
P
-
Pak, Ali
Numerical study of the effect of reservoir permeability and fluid leak-off factor on the Hydraulic fracture characteristics in oil reservoirs and comparison with KGD and PKN analytical models [Volume 5, Issue 1, 2022, Pages 60-81]
-
Pak, Ali
Investigating the effects of conductive-convective heat transfer on hydraulic fracturing via a fully coupled THM analysis using an enriched EFG method [Volume 5, Issue 3, 2022, Pages 74-83]
R
-
Rasol Zadeh, Hossein
Quantitative seismic facies analysis by the cross-correlation coding and matching with depositional facies;
(A case study of the Poseidon region of Australia ( [Volume 5, Issue 4, 2022, Pages 54-67]
-
Razavian, Fatemeh
Ranking and Analysis of the Interaction among Factors Influencing Well Control Barriers in the Drilling Operation using the Hybrid Multi Criteria Decision Making Model with DANP Approach [Volume 5, Issue 1, 2022, Pages 46-59]
-
Riahi, Mohammad Ali
Separation of hydrocarbon reservoir zone using three-dimensional seismic data, wells and geomechanical parameters in one of the oil fields in southern Iran [Volume 5, Issue 4, 2022, Pages 41-53]
S
-
Saadatnia, Narges
Geomechanical modelling and cap-rock integrity of one of the southwest Iranian giant carbonate oil field [Volume 5, Issue 3, 2022, Pages 43-60]
-
Saadouni, Jalil
Evaluation of hydrocarbon generation potential of source rocks in North Dezful region by determining the richness of organic matter using well surveying logs [Volume 5, Issue 2, 2022, Pages 56-69]
-
Sabah, Mohammad
Assesment of self-killing as a blowout control method in deep water wells [Volume 5, Issue 2, 2022, Pages 17-33]
-
Sanei, Manouchehr
Sensitivity analysis on geomechanical properties of the formation affecting the wellbore stability during underbalanced drilling in one of the southwest fields of Iran [Volume 5, Issue 2, 2022, Pages 70-79]
-
Sanei, Manouchehr
3D Numerical modeling of the effect of in-situ stress ratio on mud weight window in the drilling of the Zagros sedimentary basin [Volume 5, Issue 3, 2022, Pages 26-42]
-
Shaban-nia, Hamed
Sensitivity analysis on geomechanical properties of the formation affecting the wellbore stability during underbalanced drilling in one of the southwest fields of Iran [Volume 5, Issue 2, 2022, Pages 70-79]
-
Sharghi, Yousef
Geomechanical modelling and cap-rock integrity of one of the southwest Iranian giant carbonate oil field [Volume 5, Issue 3, 2022, Pages 43-60]
-
Soltanian, Hamid
Investigation of the effect of in situ stresses and porosity on crack propagation mechanism in hydraulic fracturing by displacement discontinuity method [Volume 5, Issue 1, 2022, Pages 17-28]
T
-
Tabatabaee Moradi, Seyyed Shahab
Finite element analysis to investigate the success probability of stress cage technology relative to regime of in-situ stresses for control of drilling fluid lost circulation [Volume 5, Issue 4, 2022, Pages 82-90]
-
Taheri, Ehsan
Treatment of relative permeability term in two-phase flow problems in porous media [Volume 5, Issue 3, 2022, Pages 84-91]
-
Talebi,, Hossin
Estimation of Geomechanical Parameters, In Situ Stress Measurement Techniques, and Determination of Safe Mud Weight Windows Using Machine Learning Algorithm Methods [Volume 5, Issue 4, 2022, Pages 1-28]
-
Talebian, Seyedeh Hosna
Geomechanical modeling to identify wellbore integrity issues [Volume 5, Issue 2, 2022, Pages 48-55]
-
Taras, Yasser
Separation of hydrocarbon reservoir zone using three-dimensional seismic data, wells and geomechanical parameters in one of the oil fields in southern Iran [Volume 5, Issue 4, 2022, Pages 41-53]
-
Tayefeh Younesi, Alireza
Assesment of self-killing as a blowout control method in deep water wells [Volume 5, Issue 2, 2022, Pages 17-33]
Y
-
Yegani, Amir
Evaluation of hydrocarbon generation potential of source rocks in North Dezful region by determining the richness of organic matter using well surveying logs [Volume 5, Issue 2, 2022, Pages 56-69]
Your query does not match with any item